Unique design phono stage
The phono stage uses the best tubes out of our stringent
selection process as well as custom designed Nagra
transformers for impressive noise figures, dynamic range
and high performances.
Variable capacitive and resistive loading is provided to
allow ideal matching with all cartridges. Those settings
are placed inside the PL-P to avoid any undesirable
outside interference and maintain the signal¡¯'s integrity.
The internal moving-coil phono transformers can be
bypassed to allow the use of an external transformer or
no transformer at all.
With respect to an RIAA specification, an EQ is
available to switch-in a 3 dB rumble filter at 30 Hz.
Phono stage
Vacuum tubes 1 ECC 81 / 12AT7
1 ECC 83 / 12AX7
For Moving Coil cartridges
Sensivity 0.1 mV
Loading 47 to 837 pF and 30 to 330 Ohm
Signal-to-noise ratio 74 dB
For Moving Magnet cartridges
Sensivity 0.5 mV
Impedance 50 kOhm
Signal-to-noise ratio 80 dB
Reference Input potentiometers at maximum position
Output potentiometers at 0 dB position
Line stage
Vacuum tubes 2 ECC 81 / 12AT7
4 ECC 83 / 12AX7
Intput impedance > 100 kOhm
Output impedance 60 Ohm
Signal-to-noise 100 dB (A-weighted) at 12 dBV
Bandwidth 22 Hz –- 60 kHz (+ 0 / –- 1 dB)
Distortion < 0.02 % 1 V out, no load at 1 kHz
< 0.03 % 1 V out, 600 Ohm load
< 0.1 % 5 V out, 3 kOhm load
Reference All potentiometers at 0 dB position