ES오디오, 오르페우스(Orpheus) Heritage OPUS II 라인 신규 입고

오르페우스(Orpheus) 사는 스위스에 위치하고 있으며 2001년 창업 이래 하이엔드 오디오 시장에서 최고의 자리를 군림하고 있는 제조업체입니다.

고급스럽고 윤기 있는 소리의 대명사 오르페우스는 현재 공식 수입사인 ES오디오가 국내 독점 유통중이며 2024년 많은 분들이 기다리고 계셨던 오르페우스의 새로운 플래그십 라인인 Heritage OPUS II 라인의 SACDP, PRE, Mono Power Amp가 국내입고되었습니다.

획기적으로 아름다워진 디자인과 오르페우스만의 독보적인 자연스럽고 고급스러운 소리를 가진 초하이엔드 제품들입니다.

근시일 내에 시연회와 리뷰 등을 통해서 국내에 소개해 드리도록 하겠습니다.


Heritage SACD Player Opus IIH2-0PS1

Specifications

Mechanism Technology

System SuperAudioCompactdiscplayer
SACD Mechanism D&M
Compatible disc types SACD,CD,CD-R,CD-RW
Digital Input
Connections 1 x Audio USB type B
Supported Samples Rates
  • PCM: up to 384kHz & 32-bit
  • DSD: up to DSD256
Analog Output
Connections 1 x Balanced, 1 x Unbalanced(Stereo)
Output Voltage (Bal/Unbal) 4.8Vrms/2.4Vrms
THD+N <0.0003%(-110.5dB)@1kHz, 0dBFs
Crosstalk, L to R or R to L <-126dB
Clip to Noise Ratio (input Bal) <-126dB
Clip to Noise Ratio (input Unbal) <-126dB
Output impedance
  • Balanced: 50Ω
  • Unbalanced: 25Ω
Technology Used
  • Real dual mono DAC topology.
  • 8 DAC per channel combined to reduce the output noise floor, architecture 8-4-4-1
  • Balancing output voltage between left and right channel on a 16dB scale with a 0.1dB resolution.
Power
Nominal line voltage 100, 115 or 230Vac
Input voltage range ±8%
Maximum power consumption 100W
Standby consumption Less than 1W
Size & Weight
Height
  • Device alone: 146 mm
  • Device + spikes: 175mm
  • Device + spikes + PSU: 301 mm
Depth 440mm
Width 440mm
Weight (Power supply included) 52kg
Safety Features

Automatic mute if sensing a drop in the mains supply voltage


Heritage Preamplifier Opus II–H2-2331

Specifications
Input General

Independent gain adjustment between left±12.7 dB (in steps of 0.1 dB) and right channels

Grounding (menu selection)
  • Grounded:Signal ground is connected to earth
  • Lifted: Signal ground is decoupled from earth
Input Balanced
Connections XLR
Impedance 94kΩ
Maximum input voltage 18.4Vrms

Input Unbalanced

Connections RCA

Impedance

47kΩ

Maximum input voltage

9.2Vrms

Volume Control

Adjustment range -127.5dB to +6dB(in steps of 0.5dB)
Balance correction range ±12.8dB(in steps of 0.1dB)
Output
Frequency range (+0dB, -0.1dB) 5Hzto1.5MHz
THD+N (22Hz to 44kHz) <0.00063%@1kHz(-105dB)
Clip to Noise Ratio (input Bal) -132dB
Clip to Noise Ratio (input Unbal) -126dB
Number of outputs
  • OutputA: 1 x Balanced or 1 x Unbalanced
  • Output B: 1 x Balanced or 1 x Unbalanced
Technology Used
  • Dual analogique fully Balanced Discrete preamplifier.
  • Volume control technology based on constant impedance resistive quadrupoles with a logarithmic distribution architecture.
  • Specificity of output B: Can be used in Bypass mode in order to connect, for example, one Headphone Amplifier with integrated volume control.
Power
Nominal line voltage 100, 115 or 230Vac
Input voltage range ±8%
Maximum power consumption 60W
Standby consumption Less than 1W
Size & Weight
Height
  • Device alone: 146 mm
  • Device + spikes: 175mm
  • Device + spikes + PSU: 301 mm
Depth 440mm
Width 440mm
Weight (Power supply included) 50kg
Safety Features
Automatic mute if sensing a drop in the mains supply voltage

Heritage Mono Amplifier Opus II–H2-3M81

Specifications
Input
Connections XLR or RCA
Balanced input Impedance 94kΩ
Unbalanced input Impedance 47kΩ
Balanced input sensitivity 2.525Vrms
Unbalanced input sensitivity 1.162Vrms

Grounding (switch on the rear panel to earth selection)     

  • Grounded: Signal ground is connected to earth
  • Lifted: Signal ground is decoupled from earth
Output
Nominal audio power 800Wrms@4Ohm
Continuous peak power 2200Wpic (max80.8Vpic28Apic)
Instantaneous power peak (<200ms) 3600Wpic (max80.8Vpic45Apic)
Frequency range (+0dB, -0.1dB) 5Hz to 90kHz
Frequency range (-3dB) 0.7Hz to 165kHz
THD+N @ 800W per chanel on 4Ohm <0.0018%@1kHz(-95dB)@22Hz to 40kHz
THD+N unloaded <0.0007%@1kHz(-103dB)
Clip to Noise Ratio (input Bal) -123dB
Clip to Noise Ratio (input Unbal) -123dB
Gain Unbalanced 33.1dB(45.28V/V)
Gain Balanced 27.1dB(22.64V/V)
Output impedance 0.0072Ohm
Damping Factor @ 8 Ohm 1100
Technology Used
  • Unique bias circuit guarantees temperature-compensated bias current
  • Real dual mono topologies with 12 High resolution MOSFETs for a total of 96 A peak-to-peak
  • Oversized power supply circuit, capacitive decoupling of mains voltage to eliminate interference.
  • DC free output.
Power
Nominal line voltage 115 or 230V
Input voltage range ±15%
Nominal power consumption 1200W
Standby consumption Less than 1W
Size & Weight
Height 271mm
Depth 440mm
Width 440mm
Weight 56kg
Safety Features
  • Guaranteed power output without any parasitic DC components
  • Output voltage monitoring circuit to protect the loudspeakers if too low a frequency is applied to the input.
  • Output current limited to +-45A peak
  • Overcurrent protection: cuts the power output if a current of 20 Arms or more (1600W at 4Ohm) remains for more than 200 ms

Orphues
수입사 ES오디오
수입사 연락처 02-499-3627